CORRADI CORINOX® Precision Files, Halfround, 6" and 8", set of 4

Description

CORRADI CORINOX® Precision Files, Swiss Pattern, Halfround, 6" and 8", set of 4
Set of 4:
01 x 6", cut 0, cross section mm 16.0 x 4.5
01 x 6", cut 2, cross section mm 16.0 x 4.5
01 x 8", cut 0, cross section mm 21.0 x 6.0
01 x 8", cut 2, cross section mm 21.0 x 6.0
Manufactured according to the highest standards of dimensional accuracy, cutting performance and service life.
Compared to engineers’ files, precision files have marked tapering and smaller tips, sharp edges, strict dimensional and flatness tolerance and a higher and uniform hardness. That is obtained using, in all manufacturing steps, the most advanced CNC systems and the best available robotic technologies.
Thanks to CORINOX® coating, they:
have a surface hardness of 1200 HV (70-72 HRc), therefore a higher wear resistance and longer service life. That allows filing of hardened and tempered steel up to 60 HRc, hard-to-file materials like heat resistant steel, exotic alloys and reinforced plastics.
do not clog, allowing an easy work on plastics, rubber or wood.
have a surface corrosion-free layer, which allows filing of stainless steel leaving no corrosive residue on the workpiece.
They allow filing of hard materials which normally would require diamond files, with lower cost and higher stock removal.
They are used for manufacturing of equipment for food, chemical, navy industries and nuclear powerplants. They are used in jewellery making for filing platinum.
Professional product, made in Italy.
Suitable For:
steel (hardened and tempered, up to 60 HRc), heat resistant steel, stainless steel, exotic alloys (nickel, molybdenum, titanium, Inconel, etc.), plastics (nylon, Teflon, polycarbonate), reinforced plastics, platinum.
Applications:
workshop, jewellers and goldsmiths.
All our products are entirely made in Italy by CORRADI.
SCALE OF CUT
Click to show
OUR COMPLETE LINE
GOLD Precision Rasps
GOLD Precision Rasp, Hand 6", cut 6
GOLD Precision Rasp, Hand 6", cut 10
GOLD Precision Rasp, Halfround 6", cut 6
GOLD Precision Rasp, Halfround 6", cut 10
GOLD Precision Rasp, Halfround 8", cut 8
GOLD Precision Rasp, Round 6", cut 6
GOLD Precision Rasp, Round 6", cut 10
GOLD Precision Rasp, Round 8", cut 8
GOLD Precision Rasp, Cabinet 10", cut 8
GOLD Precision Rasp, Cabinet 10", cut 10 Extra Fine Cut
Precision Rasps
Model Makers' Rasp, Hand 8", cut 4
Model Makers' Rasp, Halfround 5", cut 6
Model Makers' Rasp, Halfround 8", cut 4
Model Makers' Rasp, Round 8", cut 4
Model Makers' Rasp, Cabinet 10", cut 5
Model Makers' Rasp, Cabinet 10", cut 6
Model Makers' Rasp, Cabinet 12", cut 5
Model Makers' Rasp, Pattern Makers' Narrow Cabinet 10", cut 6
Model Makers' Rasp, Pattern Makers' Narrow Cabinet 10", cut 7
Handy Rasps
Handy Rasps, cut 0, set of 5
Handy Rasps, cut 2, set of 5
Handy Files and Rasps, special set of 6
Needle Rasps
Needle Rasps 140-160 mm, set of 12
Needle Files and Rasps Special Set
Riffler Rasps
Rifflers Rasps, cut 0, set of 8
Combi Rifflers Rasps, 12", cut 2, special set of 8
Riffler File-Rasps for sculptors, set of 6
Precision Files
Precision Files, Hand, 4", set of 6
Precision Files, Hand, 6", set of 6
Precision Files, Hand, 8", set of 6
Precision Files, Hand, 10", set of 3
Precision Files, Halfround, 4", set of 4
Precision Files, Special Halfround Ring, 6", set of 5
Precision Files, Crossing, 6", set of 2
Precision Files, Crossing, set of 4
Precision Files, Narrow Warding, 6", set of 2
Precision Files, Special Equalling, 8", set of 2
Precision Key File for Locksmiths, Pippin, 6", set of 2
Precision Files, Barrette, 6"+ 8", set of 4
Precision Files, Knife, 6"+ 8", set of 4
Precision Files, Regular + Narrow + Extra Narrow Pillar, 6", set of 9
Luthiers Precision File, Narrow Halfround, 6", cut 00
Luthiers Precision File, Round, 10", cut 0
Luthiers Precision Files, Cylindrical Round, set of 4
Precision Nut Files, set of 3
CORINOX® Precision Files
CORINOX® Precision Files, Hand, 6", set of 3
CORINOX® Precision Files, Hand, 8", set of 3
CORINOX® Precision Files, Hand, 10", set of 3
CORINOX® Precision Files, Halfround, 6" and 8", set of 4
CORINOX® Precision Files, Round, 6" and 8", set of 3
CORINOX® Precision Files, Pillar, 6" and 8", set of 5
CORINOX® Precision Files, Square, 6" and 8", set of 3
CORINOX® Precision Files, Three square, 8", set of 2
Handy Files
Handy Files, cut 00, set of 5
Handy Files, cut 1, set of 5
Handy Files and Rasps, special set of 6
Checkering Files
Checkering Files, Pillar, set of 2
Checkering Files, Pillar, set of 4
Checkering Files, Special Hand, set of 2
Checkering Files, Special Hand, set of 4
Machinist Engineers' Files
Machinist Engineers' Files, 4", set of 9
Machinist Engineers' Files, 4", set of 17
Machinist Engineers' Files, 5", set of 9
Machinist Engineers' Files, 6", set of 9
Machinist Engineers' Files, 8", set of 9
Machinist Engineers' Files, 12", set of 9
Sharpening Files
Special Auger bit Sharpening Files, set of 4
Float Sharpening File, set of 3
Float Files
Cabinetmakers' (Planemakers') Float
Float Sharpening File, set of 3
Needle Files
CORINOX® Needle Files, cut 0, set of 6
CORINOX® Needle Files, cut 00, set of 6
CORINOX® Needle Files, cut 2, set of 6
Precision Needle Files for Luthiery & Instruments, set of 12
Precision Needle Files for Luthiery & Instruments, Round, set of 5
Needle Files and Rasps Special Set
Riffler Files
Die Sinkers' Rifflers for engravers, chisellers, etc., cut 0, set of 8
Die Sinkers' Rifflers for engravers, chisellers, etc., cut 2, set of 8
Die Makers' Rifflers for silversmiths, etc., cut 0, set of 8
Die Makers' Rifflers for silversmiths, etc., cut 2, set of 8
Special Die Makers' Rifflers, cut 0, set of 8
CORINOX® Die Makers' Rifflers, cut 0, set of 6
CORINOX® Die Makers' Rifflers, cut 2, set of 6
Riffler File-Rasps for sculptors, set of 6
Escapement Files
Escapement Files with square handle, cut 2, set of 12
Escapement Files with square handle, cut 4, set of 12
Other Files
Lathe Files 12", set of 2
Lathe Files 14", set of 2
Wood and Soft Metal Files, set of 4
Vul-Crylic Files, set of 2
Modelling Extra Small Files & Rasps Kit
GOLD Molding Plane Irons
GOLD Moulding Plane Irons - Hollow & Round set
ORDER INFORMATION
We sell only to private customers.
If you want to buy multiple items, add them to your cart and request a shipping total to save on shipping costs.
After payment has been made, it will no longer be possible to make any changes to the order.
SHIPPING INFORMATION
Shipping only to USA, no exceptions.
The shipping charges INCLUDE all customs duties, taxes and additional services.
The order is shipped within 24 hours after the receipt of payment with FedEx International Economy, no exceptions.
Your 10-digit phone number is required for shipping.
We only ship to the address in your PayPal account. We do not ship to PO boxes.
The delivery time is normally 4-5 working days. FedEx does not deliver on Saturdays and Sundays. We'll provide you with the tracking number in order to monitor your delivery status.
The products are packed carefully in order to ensure a safe shipping.
We are not responsible for any delay or other anomalies in the delivery due to independent reasons or not referable to us.